VERTICAL & HORIZONTAL MILLING MACHINE
CS-G450A
FEATURES
  • THREE-AXIS SIMULTANEOUS FEED AND RAPID TRAVERSE
    Instead of having each axis driven by a separate tiny motor, MILL uses a single powerful 3 HP motor to drive all three axes. This means you can be simultaneous feeds or rapid traverse on the table and the knee.
    The availability of power-feed on the knee (in addition to rapid traverse) enables you to do deep boring and drilling on large work pieces.
  • CROSS FEED LEADSCREW MOUNTED IN MIDDLE OF KNEE
    No more side-mounted cross leadscrew exposed to chips and dirt. The MILL crossfeed
    leadscrew is located inside the knee, centered so that the table movement in-and-out will
    not have any vibration due to uneven surface contact between the saddle and the knee.
  • The universal table can swivel for more versatile milling.(Optional)
  • 7.5HP motor and #50 taper of hotizontal spindle.(Optional)
STANDARD ACCESSORIES: OPTIONAL ACCESSORIES:
  1. Cutting fluid equipment 1 unit
2. Cutting arbor and sleeve 1 unit
3. Adjustment tools 1 pcs
4. Tool box 1 set
5. Chip pan 1 pcs
6. Draw bar for Vertical 1 pcs
7. Draw bar for horizontal 1 pcs
8. Leveling blocks 4 pcs
9. Leveling bolts 4 pcs		 1. Air power draw bar
2. Digital Read Out
3. Swivel table
4. Extend table 1500 x 300mm